Some stitches are not appearing when auto-digitizing artwork

Instructions to generate stitches for these objects

1. Select the small objects that don’t have stitches
2. Select Edit Objects > Break Apart this will convert it from a branched object to a run object
3. Press <G> to generate stitches for the run objects
   

• Related Articles

• What is the best way to save image files to open in Hatch Embroidery for Auto-Digitizing?

  Hatch Embroidery can read several image formats. There are some methods that will work best in Hatch Embroidery especially if you are wanting to do part or all the design with one of the Hatch Embroidery Auto-Digitizing functions. NOTE: This is NOT ...

• Where is the installed artwork located in Hatch Embroidery

  All versions of Hatch Embroidery have artwork that is installed with the software. Hatch artwork is located in the 'Users' folder on your C: drive. Hatch 1 File location C:\Users\Public\Pictures\Hatch 1 Pictures\Artwork Hatch 2 and 3 File location ...

• What artwork image file types can Hatch Embroidery open?

  What artwork image file types can Hatch Embroidery open? Only Hatch Embroidery Composer and Digitizer supports image files. Hatch Embroidery 3 can open these files: .PNG .BMP .JPG .WMF .EMF .EPS .CDR** *In HATCH 3, if you have CorelDRAW Standard GEM, ...

• My auto update is timing out before completed the download

  STEPS TO DO: Click here to download Hatch software directly You will then need to install the update by clicking on the Hatch_setup.exe file that was downloaded to your computer (most likely in the Downloads folder) and install the software. If you ...

• How to stop my design from jumping around

  How to stop my design from jumping around? If I seems your design is jumping around the screen you need to set your design to "auto centering" in your hoop. 1. Right click on the hoop icon 2. Check "Automatic Centering" as the Hoop Position 3. Click ...