A valid license to run Hatch Embroidery could not be found. (H0007) Hatch 2
Wilcom Software affected: HATCH EMBROIDERY 2
OS Platform: Windows
Solution: Update the HASP Driver to the latest version
Steps to Follow :
Method 1
1.1 Please temporarily disable your antivirus/protection software.
1.2. Please reinstall HASP driver by clicking the Reinstall HASP Driver
If using the above Installation method was not able to help resolve the issue, kindly apply either Method 2 or Method 3 specified below
Method 2
2. 1. Please temporarily disable your antivirus/protection software.
2.2. Please download the latest HASP Driver from Gemalto website link https://supportportal.thalesgroup.com/csm?sys_kb_id=61fb0ee1dbd2e78cfe0aff3dbf9619ab&id=kb_article_view&sysparm_rank=14&sysparm_tsqueryId=0309dd6cdb08e45080b2345239961913&sysparm_article=KB0018320 and use the Sentinel HASP/LDK - Windows GUI Run-time Installer then follow the instructions through
Method 3
3. 1. Please temporarily disable your antivirus/protection software.
3.2. Please download the latest HASP Driver from Gemalto website link https://supportportal.thalesgroup.com/csm?sys_kb_id=979a4e21db92e78cfe0aff3dbf9619c6&id=kb_article_view&sysparm_rank=15&sysparm_tsqueryId=73995120db48e45080b23452399619ee&sysparm_article=KB0018319 and use the Download the HASP/LDK - Command-Line Runtime installer
Note: you need to create a folder of “C:\HASP”.
1) Copy the downloaded “haspdinst.EXE” file to “C:\HASP” folder
2) Right click on the Windows “Start” button
3) In the right click menu, click on “Command Prompt (Admin)” menu
4) Click on OK button in the warning message to allow it to run
5) In Command Prompt box, type command line (you may copy and paste it into the box):
C:\HASP\haspdinst –r –purge
6) Hit “Enter” key
Note: seconds later, the system will prompt a dialogue box that the update is successful.
7) In Command Prompt box, type command line (you may copy and paste it into the box):
C:\HASP\haspdinst - i -kp
8) Hit “Enter” key
Note: At this point, the reinstalling HASP driver procedure is done.
Once installed, restart the PC and re-launch the Hatch Embroidery 2 software.
NOTE - Please re-enable your antivirus/protection software once the Hatch Embroidery 2 is up and running.
Related Articles
A valid license to run Hatch Embroidery could not be found. (H0007) in Hatch 3 [Mac or Windows PC]
SECURITY ERROR: A valid license to run Hatch Embroidery could not be found. (H0007) This may indicate that the file on your computer associated with your license has become corrupt and needs to be re-installed. PRE-REQUISITE: Temporarily disable your ..."Error 43 installing license..." A valid license to run Hatch embroidery software could not be found error when starting Hatch v1 Software
Symptom: "Error 43 installing license..." A valid license to run Hatch Embroidery software could not be found error when starting Hatch v1 Software These errors are due to a corrupted Hatch Embroidery software license file on the PC. Wilcom Software ...A valid license to run Hatch Embroidery 3 cannot be found H0031
Problem: A valid license to run Hatch Embroidery 3 cannot be found H0031 Solution: 1. Close all Hatch Windows 2. Temporarily disable your antivirus and Windows Firewall Temporarily disable any anti-virus installed on this computer. Temporarily ...The license to run this product has expired. Error code H0041
Security Error: The license to run this product has expired. Error code H0041 SOLUTION: Delete v2c files STEPS: Please navigate to the following folder, it may be hidden. See here: How to show any hidden folder, eg the ProgramData folder ...How to Resolve the Hatch 3 Error: “A Valid License to Run Hatch Embroidery Could Not Be Found. (H0007)”
If you encounter the error message “A valid license to run Hatch Embroidery could not be found. (H0007)” when launching Hatch Embroidery 3, it may indicate that the license file on your computer has become corrupt and needs to be reinstalled. Steps ...